June 6, 2025 6 min read
How to Choose a Wall Panel Installation Machine: Panel Length, Weight and Floor Height
A practical selection framework covering panel specifications, single-panel weight, working floor height and site access.
为
Wishes技术组
June 6, 2025

Confirm the panel first, then the machine
The right installation machine depends on both panel specifications and site conditions. Before comparing models, confirm panel length, thickness and single-panel weight, then review floor height and site access.
Four dimensions to check
- Panel length: 2.4 m to 3.6 m is common; longer panels need a longer lifting stroke and more counterweight.
- Single-panel weight: this sets the lifting capacity and hydraulic configuration.
- Working floor height: leave clearance for rotating and standing panels upright.
- Site access: door width, elevator size and floor loading decide whether the machine can enter.
Common mistakes
Selecting only by panel length while ignoring panel weight and access conditions is the most frequent cause of rework. Prepare a checklist with these four values and confirm each item with the supplier before ordering.
On-site checklist
Before entry, confirm power supply, floor flatness and working clearance. Run no-load and light-load tests, verify clamping, rotation and travel, then start normal production.


